. OPERATION EXPLANATION OF COMPONENTS 3 - 51 EMERGENCY STEERING SWITCH (If equipped) This switch (22) is the manual control switch for the emergency steering. (If This steering. Even when the engine has stopped, steering operations are made possible he switch and the emergency the machine monitor light up e to operate the steering. Whe n th e switch is released, it auto matically returns to its original position. Actuate t he emergency steering onl y in cases of emergency or when checking the function. The t ime for operating the emergen cy steering continuously is a maximum of 60 seconds Whe n using the emergency steerin g, travel at a speed of less tha n 5 km/h (3.1 MPH) .
For d etails, see "EMERGENCY ST EERING (PAGE 3-136)" in the OPERATION section. COOLING FAN AUTO REVERSE RO TATION SWITCH he cooling fan in the reverse . unction ON This switch (23) is used to rotate t direction when cleaning the radiator Position (a): Auto reverse rotation f The fan automatically r every 2 hours. The pilot lamp inside t reverse rotation pilot l light up. otates in reverse for 2 minutes he switch and the cooling fan amp on the machine monitor n switch ON Position (b): Manual reverse rotatio When the fan is rotatin switch is pressed once if the switch is pressed normal direction. Wh reverse direction, the c lamp on the machine rotation continues for switch is pressed.
For cleaning, see "CLEA COOLER FINS (PAGE g in the normal direction, if the , the fan will rotate in reverse; again, the fan will rotate in the en the fan is rotating in the ooling fan reverse rotation pilot monitor lights up. Reverse approx. 10 minutes after the details of the procedure when N RADIATOR FINS AND 4-27)". tantly set to normal rotation. Position (c): Neutral (OFF) The cooling fan is cons Run the engine at idling when oper