. SAFETY PRECAUTIONS FOR MAINTENANCE TIRES 2 - 44 HANDLING TIRES takenly, there is danger that the tire or that the rim may fly off and cause th. as follows. , repair, and assembly of the tires uipment and special technology, so u distributor to carry out these ified by Komatsu and maintain the ure: see "HANDLING THE TIRES (PAGE 3-154)" es, check that no other person is nstall an air chuck with a clip that can pressure from becoming too high, time to time with an air gauge while n abnormally or the rim parts do not m with the tire or rim parts. Always butor for repairs.
ed properly when the tire is being that the rim parts may fly off, so set d the tire, and do not stand directly side the tread when pumping up the If tires or rims are handled mis takenly, there is danger that the tire may explode or be damaged, or that the rim may fly off and cause serious personal injury or dea To maintain safety, always do Maintenance, disassembly and rims requires special eq always ask your Komats operations. Always use the tires spec uipment and special technology, so specified inflation pressure. Suitable tire inflation press When pumping up the tir standing near the tire, and i be secured to the air valve.
To prevent the tire inflation measure the pressure from pumping up the tire. nstall an air chuck with a clip that can If the tire pressure goes dow n abnormally or the rim parts do not fit the tire, there is a proble contact your Komatsu distri m with the tire or rim parts. Always If the rim parts are not fitt pumped up, there is danger up a protective fence aroun in front of the rim. Stand be tire. that the rim parts may fly off, so set d the tire, and do not stand directly side the tread when pumping up the Do not adjust the tire inflatio n pressure immediately after traveling at high speed or carrying out operations un der heavy load. light a fire near the tire.
e from a single tire or from both tires of a dual assembly prior to removing any rim Never carry out welding or Always release all pressur components. Before removing the tire fro m the machine for repairs, remove the valve partially to release the air from the tire, then remove the tire.