Keeping the Machine Clean SAFETY Never use flammable liquids to clean your machine. Use only approved non-flammable cleaning solvents to clean parts or the machine itself. Do not use high-pressure steam cleaners or caustic soaps to wash the machine. Steam cleaning or using caustic soaps may damage paint, wiring, or sensitive electrical components. Never use high-pressure water to flood the inside of the operator’s cab. Doing so may damage sensitive electrical components. When pressure washing, use high-pressure hot water and mild grease-cutting soaps. Always grease the machine after cleaning to push any water out of the pivot-point connections. Remove trash daily or more often as necessary.
Never allow trash to accumulate on the machine. Using Drop Lamps Use only approved anti-explosion proof lamps when checking fuel, oil, or batteries. Non-approved lamps can cause an explosion or fire. Working Under the Machine Always use approved jack stands to support the machine when performing maintenance under the chassis. Never rely on hydraulic jacks or the machine’s work equipment to support the machine when working under or on the machine. Always lower the work equipment to the ground before raising the machine for repairs. When performing maintenance or repairs with the bucket raised, always support the bucket safely with the proper support (1) as shown in the figure.
Never use concrete blocks for support; they can collapse under even light loads. WA380-6 1-35