Operating * Ensure all cab glass, mirrors and light lenses are clean during vehicle operation for maximum visibility. * Always keep cab floor clear of anything that could restrict full operation of pedals. * Always make sure all gauges, warning/indicator lights and controls are working properly before operating vehicle. * Always perform 'Pre-Operating Checks' described on page 4-9 to ensure the vehicle is ready for operating. * Always wear seat belts when operating the vehicle. * In the event of a loss of steering system supply pressure, a red warning light on the instrument panel will illuminate.
If this light illuminates, indicating a loss of steering power, the vehicle must be stopped immediately and no further operation attempted until the fault is corrected. * Do not operate if exposed personnel enter the immediate work area. * Sound horn before starting engine or beginning to move vehicle; two blasts for forward and three blasts for reverse. * Watch for ground crew and other personnel on foot. Sound horn as a warning before setting vehicle in motion and when approaching ground crew. * Be sure the body is fully down before moving the vehicle. * Always try to face or look in the direction the vehicle is travelling. 2-9