MAINTENANCE USE WARNING TAG DURING SERVICE Alert others that service or maintenance is being performed and tag operator’s cab controls - and other machine areas if required - with a warning notice. Warning tags for controls are available from Daewoo distributors; see Figure 24. WARNING CLEAN BEFORE INSPECTION OR MAINTENANCE HAOC920L Clean the machine before carrying out inspection and maintenance. This prevents dirt from getting into the machine and also ensures safety during maintenance.
Figure 24 If inspection and maintenance are carried out when the machine is dirty, it will become more difficult to locate the problems, and also there is danger that you may get dirt or mud in your eyes or that you may slip and injure yourself. When washing the machine, do the following; Wear shoes with non-slip soles to prevent yourself from slipping and falling on wet places. Wear safety glasses and protective clothing when washing the machine with high-pressure steam. Take action to prevent touching high-pressure water and cutting your skin or having mud fly into your eyes. Do not spray water directly on electrical components (sensors, connector) (1, Figure 25).
If water gets into the electrical system, there is danger that it will cause defective operation and malfunction. Figure 25 Pick up any tools or hammers that are laying in the work place, wipe up any grease or oil or any other slippery substances, and clean the area to make it possible to carry out the operation in safety. If the work place is left untidy, you may trip or slip and suffer injury. S0103010K Page 25 Wheel Loader Safety