DL06 Operation and Maintenance 2.3.8. Engine oil z Check oil level with the oil level gauge and replenish if necessary. z Check the oil level with the engine cooled. If the engine is warm, allow time for 5 ∼ 10 minutes for oil drain into the crankcase before checking oil level. The oil level must be between Max and Min lines on the gauge. z Engine oil should be changed at the specified intervals. Oil filter cartridge should be changed simultaneously.
- First oil change :After 5,000km (50Hr) operating Use Conditions Intervals 1 day operating distance 500km less After once replenishment, (Bus, truck) every 40,000km Vehicle engine 1 day operating distance 500km more After once replenishment, (Bus, truck) every 60,000km Industrial engine Excavator, fork lift Every 500Hr z The following oils are also recommended. Engine oil SAE No. API No.
ACEA-E5 DL06 SAE 10W40 (API CI-4) z Engine oil capacity Engine oil capacity Engine model Oil pan inside Total Use Suffix Max (lit) Min (lit) (lit) Truck EUTCA 19 15 21 EUTEA/C/F/G/H/I 27 17 29 Excavator EUTEB/D/J/K/L 22 16 24 EUTLA/B/C/D 27 20 29 Fork lift EUTFA/B/C/D 27 17 29 25 Technical Information Printed in Nov. 2006 PS-MMA0418-E1A Use Conditions Intervals Vehicle engine 1 day operating distance 500km less (Bus, truck) After once replenishment, every 40,000km 1 day operating distance 500km more (Bus, truck) After once replenishment, every 60,000km Industrial engine Excavator, fork lift Every 500Hr Engine oil SAE No. API No.
DL06 SAE 10W40 ACEA-E5 (API CI-4) Engine oil capacity Engine model Oil pan inside Total (lit) Use Suffix Max (lit) Min (lit) Truck EUTCA 19 15 21 Excavator EUTEA/C/F/G/H/I 27 17 29 EUTEB/D/J/K/L 22 16 24 EUTLA/B/C/D 27 20 29 Fork lift EUTFA/B/C/D 27 17 29