MAINTENANCE MAINTENANCE QUICK REFERENCE CONT’D 8. Rear Axle Bearings 7. Tie Rod End 9. Swing Arm Bushings 5. Front Wheel Bearings 6. Ball Joint * More often under severe use, such as operated in water or under severe loads. Ў Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information) © Annually or 100 hours of operation (refer to Maintenance Schedule for additional information) ў Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or Mobilegrease Special 2.6 Ill. # Item Lube Rec.
Method Frequency* 5 Front Wheel Bear- ings Sealed; Replace Inspect and replace bearings if necessary Annually © 6 Ball Joint Polaris All Season Grease¢ Locate grease fitting on back side of struts and grease with grease gun. Semi-annually ¡ 7 Tie Rod Ends Polaris All Season Grease¢ Lift boot. Clean away dirt and grease. Apply fresh grease by hand and reassemble. Semi-annually ¡ 8 Rear Axle Bearings Polaris All Season Grease¢ Locate grease fitting on eccentric and grease with grease gun. Semi-annually ¡ 9 Swing Arm Bush- ings Polaris All Season Grease¢ Locate grease fitting on swing arm and grease with grease gun. Semi-annually ¡