MAINTENANCE BASICS FUSES Parts of the electrical system may be damaged, if you re- place fuses with the ignition switched on! Turn the start switch to switching position '0' (OFF), be- fore starting to replace fuses. Fuses with wrong amperages may cause fires due to elec- trical faults or may immediately blow again! Only replace defective fuses with fuses of the same rat- ing. The fuses protect the electrical system. Replace defective, cor- roded, or loose fuses. The fuses are located under the cover. To access the fuses, re- move the screws fixing the cover and remove the cover. Then re- move the cover caps of the fuse boxes.
FUSE ASSIGNMENT 7-16 1 S tarter, stop magnet, socket 10A Solenoid valves gear unit 10A 2 In side lighting, radio 10A Direction indicator, horn 10A 3 H azard flasher 10A Instrument lighting 10A W 4 fr indscreen wiper and windscreen washer ont and rear 20A Working light 20A B 5 w rake light, reversing warning system, arning beacon 10A Side lamp left, lamp registration number 10A 6 F an, ventilation, heating 20A Side lamp right 10A 7 H eated rear windscreen 20A High beam 10A T 8 m ank sensor, solenoid valves high speed- otor, ALS (option) 10A Low beam 10A