Topping-up engine oil 7-25 Front axle Oil change 7-37, 7-62 Fuel filter Exchanging the filter cartridge 7-53 Fuel pump Check 7-65 Fuel system Replacing the fuel tubes 7-65 Heater Check blower 7-29 Checking rate of air flow 7-29 Cleaning blower filter 7-58 Cleaning condenser 7-59 Cleaning/replacing filter fleece 7-58 Hydraulic system Oil change 7-64 Hydraulics Changing the filter insert 7-35 Lubrication 7-31, 7-44, 7-52, 7-56 Pressure Accumulator 7-63 Prior to start 7-24 Radiator Segments Cleaning 7-51 Rear axle Oil change 7-37, 7-62 Service brake 7-62 Checking the oil level 7-41 Refilling oil 7-41 Transfer gear Checking the oil level 7-56 Oil change 7-62 Refilling oil 7-56 V-belt Checking the condition 7-34, 7-46 Checking the tension 7-34, 7-46 Ventilation Check blower 7-29 Cleaning blower filter 7-58 Water pump Check 7-66 Water separator 7-45 Windshield washer assy 7-8 Measuring indicators Coolant temperature indicator 4-14 Fuel level indicator 4-14 Operating hour meter 4-14 Operating conditions Asbestos containing material 3-7 Turning 5-20 Working High temperatures 3-8 Near overhead lines 3-15 On loose soil 3-17 Operating elements Overall view 4-2 Operating instructions 1-12 Working On snow 3-16 Operation Adjusting the bucket positioner 5-30 Adjusting the driver’s seat 5-6 Adjusting the work unit Bucket reset guiding 5-36 Changing the driving direction 5-19 Cutting the ground 5-37 Digging 5-33 Driving 5-16 On slopes 5-18 Filling up with soil 5-36 In water 5-39 Loading 3-16, 5-31 Loading in diagonal direction 5-34 Mining operations 5-35 Near overhead lines 5-39 On loose soil 5-39 On slopes 5-39 On snow 5-39 On steep slopes 5-39 Piling up material 5-35 Planing 5-36 Preparing the standstill 5-42 Removing piled up soil 5-31 Securing the articulated steering 4-28 Stopping 5-23 Transporting 5-34 Unloading 5-34 V-shaped loading 5-35 With fork tines 5-38 Working conditions Long-distance driving 7-19 Works Loading in diagonal direction 5-34 Planing 5-36 V-shaped loading 5-35 Operation elements Air conditioning 5-10 Heating system 5-9 Overall view 4-2 Control elements 4-3 Controls and indicators 4-3 Machine 4-2 O Oils.
See Lubricants 7-6 Operating agents Coolant 7-8 Fuel 7-7 Table 7-10 10-3