CONTROLS AND INDICATORS 13. WORKING LIGHTS SWITCH The front working lights may blind oncoming traffic! Before driving on public roads, turn off the working lights. This switch is used to switch on/off the working lights. 75_030 14. SWITCH FOR INSIDE LIGHTING The inside lighting has three different switch settings: 0 Switch setting 1: Steady light Switch setting 0: Off Switch setting 2: Steady light You can also switch on the inside lighting, if the start switch is in stop position For this reason, switch off the inside lighting before you leave the driver’s cab. 0 75_035 1 0 2 15. BATTERY MAIN SWITCH (OPTION) Do not operate the battery main switch with the engine running!
1 The battery main switch (1) disconnects the power supply of the machine’s electrical system. The switch is situated next to the battery in the rear section of the machine. If the machine is to be taken out of service for a longer time, you must switch off the battery main switch and remove the ignition key. 75_239 16. HIGH-SPEED GEAR SWITCH WITH CONTROL LAMP (OPTION The high-speed gear switch is a feature of machines from the ’’high-speed version’’ series. This switch is used to change between the machine’s standard speed ranges and the high-speed gear. If you switch on the high-speed gear, the control lamp in the switch goes out and the machine can be driven up to a speed of 30 k.p.h.
in the high- speed gear. If the high-speed gear is switched off, the control lamp lights up in the switch and the machine can be driven up to a speed of 20 km/h in the standard speed range. 75_053 4-20