TIC Liner 3000 with Communicator Individual functions Description of function: The rotor position sensor (s) is integrated in the hydraulic cylinders. A spindle (sp) with a steep thread rotates a signal generator (g). The angle of rotation between the retracted and the extended cylinder position is In the signal generator (g), magnets are mounted at the face end which emit a magnetic field to the sensor (s) located opposite of them. The position of the magnetic field which corresponds to the hydraulic cylinder position is detected by the sensor electronic unit. The sensor (s) transmits a pulse-width modulated signal (PWM, corresponding to the hydraulic cylinder position) to module A 20.
With the hydraulic cylinder retracted, this signal is 5% and with the cylinder extended, it is 95% PWM. Please refer to the Technical Systems / Electric system documentation for further information. 12/03 Lin-h-Kap2 2-15