7. Remove: coolant drain bolt 1 (along with the copper washer) 8. Drain: coolant (from the engine and radiator) 1 9. Check: coolant drain bolt 1 Damage Replace. 10.Install: copper washer 2 coolant drain bolt New 11.Fill: cooling system (with the specified amount of the recom- mended coolant) Recommended antifreeze High-quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines Mixing ratio 1:1 (antifreeze:water) Quantity Total amount 1.99 L (1.75 Imp qt, 2.10 US qt) Coolant reservoir capacity (up to the maximum level mark) 0.17 L (0.15 Imp qt, 0.18 US qt) From minimum to maximum level mark 0.14 L (0.12 Imp qt, 0.15 US qt) 3 - 42 CHANGING THE COOLANT CHK ADJ T.R.
10 Nm (1.0 m · kg, 7.2 ft · lb)