6. Install: battery 7. Connect: battery leads (to the battery terminals) 2 1 CAUTION: _ First, connect the positive battery lead 1 , and then the negative battery lead 2 . 8. Check: battery terminals Dirt Clean with a wire brush. Loose connection Connect properly. 9. Lubricate: battery terminals 10.Install: battery holding bracket front carrier Refer to “FRONT CARRIER AND FRONT GUARD”. battery cover Refer to “SEAT AND SIDE PANELS”. EBS00121 CHECKING THE FUSES The following procedure applies to all of the fuses. _ To avoid a short circuit, always set the main switch to “OFF” when checking or replacing a fuse. CAUTION: 1. Remove: battery cover Refer to “SEAT AND SIDE PANELS”.
3 - 79 CHECKING AND CHARGING THE BATTERY/ CHECKING THE FUSES CHK ADJ Recommended lubricant Dielectric grease