EBS00207 INSTALLING THE ENGINE 1. Install: rubber dampers (front side) 1 engine mounting bolts (front lower side) 2 engine mounting bolts (front upper side) 3 rubber dampers (rear side) 4 rubber damper nuts (rear side) 5 engine 6 engine mounting bolts (rear lower side) 7 engine mounting bolts (rear upper side) 8 rubber damper nuts (front side) 9 7 8 4 9 5 3 2 1 6 4 CAUTION: 8 Make sure that the engine does not strike the brake pipe when installing it. 1 7 2 3 NOTE: _ Do not fully tighten the bolts and nuts. 2. Tighten:
engine mounting bolts (front lower side) 2 engine mounting bolts (front upper side) 3 LT engine mounting bolts (rear lower side) 7 engine mounting bolts (rear upper side) 8 LT rubber damper nuts (front side) 9 rubber damper nuts (rear side) 5 4 - 8 ENGINE REMOVAL ENG T. 42 Nm (4.2 m · kg, 30 ft · lb) R. T. 10 Nm (1.0 m · kg, 7.2 ft · lb) R. T. 42 Nm (4.2 m · kg, 30 ft · lb) R. T. 10 Nm (1.0 m · kg, 7.2 ft · lb) R. T. 42 Nm (4.2 m · kg, 30 ft · lb) R. T. 42 Nm (4.2 m · kg, 30 ft · lb) R.