Replace the head- light relay. 9 - 32 LIGHTING SYSTEM ELEC – + EBS01069 2. Headlight relay 5. Wiring • Remove the headlight relay. • Check the entire lighting system’s wiring. • Connect the pocket tester (Ω × 1) and bat- Refer to “CIRCUIT DIAGRAM”. tery (12 V) to the headlight relay as shown. • Is the lighting system wiring properly con- È high beam nected and without defects? É low beam YES NO Positive battery terminal → yellow 1 Negative battery terminal → black 2 Positive tester probe → blue 3 Check the condition Properly connect or Negative tester probe → of each of the lighting repair the lighting yellow 4 or green 5 system circuits. system’s wiring.
Refer to “CHECK- È 3 ING THE LIGHTING 4 SYSTEM”. EBS01070 2 1 CHECKING THE LIGHTING SYSTEM 1. The headlights fail to come on. B G Y Y 1. Headlight bulb and socket L • Check the headlight bulb and socket for É continuity. 3 Refer to “CHECKING THE BULBS AND 5 BULB SOCKETS”. • Are the headlight bulb and socket OK? YES NO B G Y Y L Replace the head- light bulb, socket or • Does the headlight relay have continuity both. between blue and yellow? È • Does the headlight relay have continuity between blue and green? É YES NO YES NO B G Y Y L