С Fasten the differential gear case breather hose to the frame with the plastic band, making sure to face the end of the band inward. Т Attach the ground lead terminal to the frame using the bolt. У Route the radiator fan motor breather hose, dif- ferential gear case breather hose, and horn switch lead (for Europe and Oceania) to the inside of the fast idle plunger outlet hose and radiator outlet hose. Ф Make sure that the catch of the holder is facing outward. Х Face the end of the plastic band inward. Ц Route the fuel tank drain hose and position the end of the hose as shown in the illustration.
Ч Pass the speed sensor lead, AC magneto lead, and final gear case breather hose through the guide in the order listed. Ш Route the speed sensor lead, AC magneto lead, and final gear case breather hose to the right of the reverse switch. К Л 2 3 5 6 7 4 И Й 1 E У B A 8 М D C Т A B D C 9 С C 0 Р E A E B D 5 П О Н Ф F C 1 A-A 1 4 4 Ц G B-B C-C F Ч Ш Х Х 0 A J A Ш 9 Щ H E-E D 5 I Ъ 2 - 35 CABLE R SPEC OUTING