1 Tail/brake light lead 2 Rectifier/regulator lead 3 AC magneto lead 4 Speed sensor lead 5 Final gear case breather hose 6 Fuel hose 7 Fuel pump lead 8 Wire harness И To tail/brake light Й Fasten the tail/brake light lead to the frame with a plastic locking tie, making sure to face the end of the tie downward. К Install the plastic band near the split in the wire harness. Л Route the tail/brake light lead to the outside of the frame. М Face the end of the plastic band downward. Н Pass the final gear case breather hose through the guide. Й К 1 2 3 A B И Л B A C C 4 5 7 1 М 5 6 2 6 8 М Н 3 A-A B-B C-C 3 2 - 40 CABLE ROUTING SPEC