Utilities Utilities (5) (5) Camera setting Camera setting ① Three cameras can be installed on the machine and the display order can be set by this menu. If the camera was not equipped, this menu is not useful. · · · · In the operation screen, if the ESC/CAM switch is pushed, rear view camera display or stop. Turnning the select switch in clockwise direction, the next ordered will be shown and in counter- clockwise direction, the previously ordered will be shown. Also, you can change camera channel using touch the screen. Push the select switch or touch the screen, the displayed screen will be enlargement.
· Mode Mode ② · When this cluster's buttons are not work, you can control using touch screen instead of these buttons. You can only control in this mode screen. · 4-22