(16) (16) ① Disassembly of cylinder assembly Disassembly of cylinder assembly Removal of inner race of taper roller bearing (5). Lift out cylinder block (3) with 2 inner race of roller bearing (5) by applying gear puller at the end of spline in the cylinder. ② Separate shoe plate (7), piston assembly (10), set plate (9) from cylinder block (3). ③ Get shoe plate (7) slide on sliding face of piston assembly (10) and remove it. Be cautious not to damage on sliding face of cam plate. ④ Remove ball guide (11) from cylinder block (3). This completes disassembly. 7-13