MACHINE OPERATIONS AND CONTROLS OPERATION CHECK FUEL LEVEL, ADD FUEL Be careful not to let the fuel overflow when adding fuel. This may cause a fire. Wipe up all fuel that is spilled. If there is sand where the fuel is spilled, remove all the sand. Fuel is flam- mable and dangerous. Keep it away from any flame. 1. Open fuel filler cap (F) of the fuel tank. 2. When fuel filler cap (F) is opened, float gauge (G) will rise according to the fuel level. Check that the fuel tank is full. Check by looking into the tank and by using float gauge (G). 3. If the tank is not full, add fuel through the fuel filler until float gauge (G) rises to the maximum position. Fuel tank capacity:
195 liters (51.48 US gal) Position of tip of float gauge (G) when tank is full: Approx. 130 mm (5.1 in) from top surface of fuel tank 4. After adding fuel, push float gauge (G) straight down with fuel filler cap (F). Be careful not to get float gauge (G) caught in the tab of fuel filler cap (F), and tighten fuel filler cap (F) securely. REMARK If breather hole (1) on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. 3-46 WARNING