Precision Farming. QUANTIMETER. The industry exclusive CLAAS CANBUS interface gives operators more flexibility of choice - allowing non-CLAAS products to talk to CLAAS machines. All QUANTIMETER outputs for yield and moisture are sent to the ISOBUS terminal for Non-CLAAS monitor display. When GPS steering is used all inputs are sent through the CLAAS CANBUS from the Non-CLAAS steering systems to utilize the CLAAS integrated steering valve. The QUANTIMETER monitoring system measures combine performance and yield. The system is easily calibrated and continuously measures grain moisture content and outputs the data to CEBIS or other installed precision monitoring displays.
The QUANTIMETER uses a volumetric measuring system that measures material in the clean grain elevator. An LEM sensor measures material on individual paddles, and even provides accurate readings on sloping terrain by implementing lateral and transverse tilt corrections and accounting for engine load speed. CEBIS • Integrated CLAAS solution • All field data stored in CEBIS for downloading Ag Leader • Factory installed option • Yield mapping capability • Machine steering capability Hydraulic chain tensioning for clean grain elevator is standard on all LEXION combines equipped with QUANTIMETER.
Trimble • Dealer installed option • Yield mapping capability • Machine steering capability Additional interface solutions • Dealer installed option • Yield mapping capability • Machine steering capability 31