COOLING FAN CIRCUIT 5.11 General Information The loader is equipped with dual cooling fans. The fans and motors are contained in a single housing and cannot be replaced individually. (fig. C2601). The cooling fans may be accessed by opening the rear door and removing the bolt retaining the engine radiator to the mounting bracket. (fig. C2498). The radiator may then be swung open. Access bolt Check the electrical wiring to make sure it will not interfere with the radiator when swung open. (fig. C2497). Also check the gas strut (optional) to radiator clearance before swinging the radiator open. It may be necessary to disconnect the gas strut if so equipped. (fig. C2603).
C2498 Electrical connections 5 C2497 Radiator fitting Gas strut Cooling fan assembly C2603 C2601 C2500 5-21