INSTRUMENTATION 5.3 9 8 2 1 3 4 5 C2937 14 13 12 11 10 17 15 18 16 19 20 C2938 21 22 23 24 5 3 The fuel gauge is retained by a bracket and 2 mount- ing nuts. Remove the nuts and the gauge can be replaced. 4 The ignition and head light switch is retained by a knurled nut on the outside of the dash panel. Remove the nut and the switch can be replaced. 5 The hour meter is retained in the dash panel with molded in tabs. Squeeze the tabs together and the hour meter can be replaced. 6 Indicator bulbs can be replaced by twisting the socket and pulling the bulb.
5-8 7 6 Index C2937, C2938 1 Boom Support Knob 2 Indicator Panel 3 Hazard 4 Rotary Beacon 5 Dipped Beam Light 6 Work Light 7 Electric Auxiliary 8 Fuel Gauge / Hour Meter 9 Ignition Switch 10 Left Hand Directional Signal 11 Electric Auxiliary 12 13 Dipped Beam Light 14 Right Hand Directional Signal 15 Hydraulic Oil Temperature 16 Parking Brake 17 Seat Belt 18 Low Charge Pressure 19 Rotating Beacon 20 Engine Oil Pressure 21 Engine Coolant Temperature 22 Alternator 23 24 Preheat Switch & Bulb Replacement To replace a faulty gauge, meter, switch or indicator bulb dash panel: 1 Remove the boom support knobs and the 6 bolts retaining the dash panel (fig. C2937).
Gently pull the dash panel out and down. 2 Remove the wiring from the effected part. Note the wire colors and terminal locations.