Functional check When the engine starter switch is turned to the "I" (ON) position, all gauge bands, switch/button indicator lights and warning lights will turn "ON" and the alarm buzzer will sound about two seconds. During this functional check, a LOGO will appear on the multifunction gauge in the graphic information area (3 and 4, Figure 35). Password Activated If a password has already been set and the system has been "LOCKED," the password display will appear on the screen once the functional check has been completed. Enter the password into the text area and then engage the starter. NOTE: Refer to “Set Password (Lock and Unlock)” on page 2-39, for further details.
CAUTION If the password does not match the stored password, the engine will not start. 1. Fuel Gauge Shows remaining fuel quantity in tank. BLUE ZONE ( ) - Indicates a normal fuel quantity. RED ZONE ( ) - Indicates that the fuel level is low. If the gauge pointer moves into the red zone, the fuel level symbol will turn "ON," and be display in the screen. Stop operation and immediately and add fuel. E F NOTE: See “Abnormal State Warning Symbols” on page 2-27, for location of this warning symbol and others. FG000040 Figure 36 Check the fuel level on firm, level ground. OP001760 Operating Controls 2-20