Operation Section 1 ± 25 (5) Mass Air Flow (MAF) meter (2004 model only) ‡ The MAF sensor detects the intake air flow (mass flow rate) in the hot-wire type air flow meter. The intake air flow is converted to a voltage value, and this signal is then transmitted to the ECU. ) 8,%: + ) + & %MVJPS[7IRWSV -RXEOI%MV8IQTIVEXYVI 7IRWSV 5) ‡ The MAF meter is installed to the rear of the air cleaner, and consists of a heater, thermometer, intake air temperature sensor, and control circuit (base). The MAF meter diverts a portion of the air from the cleaner, and measures the intake air flow at the hot-wire measuring section.
3YXPMRI(MEKVEQSJ,SX;MVI8]TI1%*1IXIV 8LVSXXPI&SH] 8IQTIVEXYVI'SQTIRWEXMRK6IWMWXSV ,SX;MVI -RXEOI%MV8IQTIVEXYVI7IRWSV ,IEXMRK6IWMWXSV ,SX;MVI -RXEOI%MVJVSQ %MV'PIERIV &]TEWW*PS[ 5) (6) Intake air temperature sensor (2010 model only) ‡ The intake air temperature sensor detects the temperature of the intake air after passing through the turbocharger. 6IWMWXERGI:EPYI O )\LEYWX+EW8IQTIVEXYVI' 5)