. SAFETY GENERAL PRECAUTIONS MOUNTING AND DISMOUNTING to stop it. NO PEOPLE ON ATTACHMENTS Never let anyone ride on the work equipment, or other attachments. There is a hazard of falling and suffering serious injury. 2 - 15 Never jump on or off the ma chine. Never get on or off a moving If the machine starts to mov e when there is no operator on the machine, do n ot jump o n to the machine DO NOT GET CAUGHT IN ARTICU LATED PORTION If the clearance at the articu lating portion changes, it will lead to serious personal injury. Do not allow anyone to com e inside the articulation range.
The clearance in the area a round the work equipment changes according to the movement lead to serious injury. Do rotating or telescoping parts of the link. If you get caught, it will not allow anyone near any of the . PREVENTION OF BURNS Hot coolant To prevent burns from hot water or steam spurting out when checking or draining the co temperature where it is po hand before starting the ope cooled down, loosen the inside the radiator before r olant, wait for the water to cool to a ssible to touch the radiator cap by ration. Even when the coolant has cap slowly to relieve the pressure emoving the cap.
Hot oil To prevent burns from hot draining the oil, wait for the oil spurting out when checking or oil to cool to a temperature where it is possible to touch the ca operation. Even when the or plug slowly to relieve the the cap or plug. p or plug by hand before starting the oil has cooled down, loosen the cap internal pressure before removing