. SAFETY PRECAUTIONS FOR OPERATION 2 - 25 PRECAUTIONS WHE N TRAVELING Never turn the k ey in the starting switch to the OFF position. It is dangerous if the engine stops w hen the m achine is traveling, bec ause the steering cannot be operated. If the engine stops, depress the brake p edal imm ediately to stop the mac When traveling height (A) of 110 to 120 cm (43.3 to 47.3 in) from the groun When traveling, do not operate the work equipment cont levers. If the work equipment control levers have to operated, stop the machine first, then operate the levers. height (A) of 11 0 to 120 cm (43.3 to 47.3 in) from the groun When traveling levers.
If the operated, stop When traveling on rough ground, travel at low speed and do not operate the steering suddenly . There is danger that the machin e may turn over. The work equipment may hit the ground surface and cause th e machine to lose its balance, or may damage the machine or structures in th e area. ne has to travel over an obstacle, keep the work Avoid traveling over obstacles when possible. If the machi equipment clos e to the ground and travel at low speed. Neve r travel over obstacles which mak e the mac hine tilt strongly to one side. or carrying out operations, always keep a safe distance from people, structures, or other oid coming into contact with them.
When traveling machines to av When passing over bridges or structures, check first that the structure is strong enough to support the w eight of the machine. W hen traveling on public roads, check first with the relevant authorities and follow their instr uctions. When operatin g in tunnels, under bridges, under electric wires, or other places where the height is limited, operate slowly and be extremely careful not to let the machi ne body or work equipment hit a nything. he road).
and the Always obey th e traffic regulations when traveling on public roads (including when crossing t If you drive the machine at high speed continuously for a long time, the tires will overheat internal pressure will be come abnormally high. This may cause the tir es to burst. If a tire bursts, it produces an ex tremely large destructiv e force, and this may cause serious injury or accident. Komatsu distributor. slope, never set the directional selector switch to ravelling. If you are going to travel continuously, please consult your When the mac hine is traveling on a flat ground or down a NEUTRAL posi Otherwise, t an accident. The transmi to serious in NEUTRAL posi tion.
Always keep it in a speed range when t Otherwise, t he engine brake is disabled and the joystick s teering lever becomes heavier, po tentially i nducing The transmi ssion and other parts of the power train may b e damaged, and there is a dange r that this will lead jury or death.