Operating & maintenance manual 4.1.2 Securing the compaction roller on the transport vehicle Attach the articulation-lock device ( 1 ) on the left side, between the front and rear end. Secure the bolt ( 2 ) by means of a safety splint pin ( 3 ). 1 2 3 Fig. 6 Articulation-lock device 4.1.3 Tying the compaction roller to the transport vehicle The compaction roller disposes of four lifting lugs ( 4 ) at the front frame and two lifting lugs at the rear end ( 5 ). Use chain hoists to secure the compaction roller on the flat bed truck at the six lifting lugs. Make sure the distances and the length of the chains are sufficient. Lifting lugs front Lifting lugs rear 5 4 Fig.
7 Securing the compaction roller 20 NOTICE Observe the national laws regarding tie-down safety standards! WARNING The compaction roller may only be fastened to the transport vehicle at the labeled lifting lugs at the front frame and at the rear end.