SAFETY EVACUATING IN CASE OF FIRE If a fire breaks out, evacuate the machine in the fol- lowing way: Stop the engine by turning the key switch to the OFF position if there is time. Use a fire extinguisher if there is time. Exit the machine. In an emergency, if the cab door or front window cannot be opened, break the front or rear window panes with the emergency evacuation hammer to escape from the cab. Refer the explanation pages on the Emergency Evacuation Method in the op- erator's manual. SA-393 18-E02B-0393 SS-1510 BEWARE OF EXHAUST FUMES Prevent asphyxiation. Engine exhaust fumes can cause sickness or death. If you must operate in a building, be sure there is adequate ventilation.
Either use an exhaust pipe extension to remove the exhaust fumes or open doors and windows to bring enough outside air into the area. 509-E01A-0016 SA-016 PRECAUTIONS FOR WELDING AND GRINDING Welding may generate gas and/or small fires. Be sure to perform welding in a well ventilated and prepared area. Store flammable objects in a safe place before starting welding. Only qualified personnel should perform welding. Never allow an unqualified person to perform welding. Grinding on the machine may create fire hazards. Store flammable objects in a safe place before starting grinding.
After finishing welding and grinding, recheck that there are no abnormalities such as the area sur- rounding the welded area still smoldering. SA-818 523-E01A-0818 SA-31