hitachi — How to Use Screens

TROUBLESHOOTING/ Monitor Unit Extending Password Duration Time IMPORTANT: This operation is applicable only to those machines that display the primary screen based upon pass- word input. By using the password duration screen, password du- ration time can be set. When restarting the machine, a password need not be input within that timeframe. 1. When turn the key switch to the OFF position, the monitor unit displays the password duration screen for ten seconds. T1V1-05-01-012 Key 1 Key 2 Key 3 Key 4 Key 5 2. While the password duration screen is still dis- played, push a relevant key, and password dura- tion time is set. Duration time assigned to each key is as follows: key 1: 0 minute key 2:

30 minutes key 3: 60 minutes key 4: 90 minutes key 5: 120 minutes Password Duration Screen (Key Switch: OFF) NOTE: If password duration time is not set ex- plicitly, 0 minute on duration time is as- sumed. 3. If turning the key switch to the ON position within password duration time, the monitor unit displays the primary screen after the starting screen. T1V1-05-01-115 Key Switch: ON T1V1-05-01-123 Primary Screen T5-2-24