Safety Ballasting for Safe Ground Contact Operating, steering and braking performance of combine can be considerably affected by heavy front end attachments which alter the center of gravity of the combine. H51907 —UN—10FEB99 To maintain the necessary ground contact, ballast the combine at the rear end as necessary. Observe the maximum permissible axle loads and total weights. HX,AG,SF6782 -19-05FEB99-1/1 Avoid Electrical Power Lines Put the grain tank unloading auger in transport position and lower the grain tank access handrail before driving on public roads.
Secure radio aerial in its transport position before driving on public roads, it may come into contact with low-hanging electrical cables. This would result in the operator suffering a severe electrical shock. H52022 —UN—14APR99 HX,STSSA,D -19-22JUL99-1/1 Parking and Leaving the Machine Lower harvesting unit to the ground. Before leaving machine, disengage harvesting unit and separator. Move multi-function lever to neutral position and shut OFF machine. Apply parking brake, remove key, and lock the operator's cab. Never leave machine unattended as long as engine is running. TS230 —UN—24MAY89 Never leave the operator's cab when driving. OUO6075,0000AEB -19-11FEB14-1/1 10-3 070717 PN=22