84 GETTING TO KNOW YOUR INSTRUMENT PANEL Off Road message indicating the necessary speed for the feature to become available will also display. Driver Assist — If Equipped ACC SET Push and release the up or down arrow button until the Off Road menu icon is displayed in the instrument cluster display. Push and release the left or right arrow button to scroll through the information submenus. When ACC is set, the set speed will display in the instrument cluster. The Driver Assist menu displays the status of the ACC system. The ACC screen may display once again if any ACC activity occurs, which may include any of the following:
Drivetrain Push and release the up or down arrow button until the Driver Assist menu is displayed in the instrument cluster display. Distance Setting Change Front Wheel Angle: displays the graphical and numerical value of calculated average front wheel angle from the steering wheel orientation. System Cancel Adaptive Cruise Control (ACC) Feature The instrument cluster display displays the current ACC system settings. The information displayed depends on ACC system status. Driver Override System Off Transfer Case Lock Status: displays “Lock” graphic only during 4WD High, 4WD High Part Time, 4WD Low status.
ACC Proximity Warning Push the ACC on/off button (located on the steering wheel) until one of the following displays in the instrument cluster display: NOTE: The instrument cluster display will return to the last display selected after five seconds of no ACC display activity Ъ page141. LaneSense — If Equipped ACC Unavailable Warning Axle Lock And Sway Bar Status (If Equipped): displays front and rear or rear only axle locker graphic, and sway bar connection graphic with text message (connected or disconnected).
Adaptive Cruise Control Off When ACC is deactivated, the display will read “Adaptive Cruise Control Off.” Pitch And Roll Adaptive Cruise Control Ready The instrument cluster display displays the current LaneSense system settings. The information displayed depends on LaneSense system status and the conditions that need to be met Ъ page154. Displays the pitch and roll of the vehicle in the graphic with the angle number on the screen. When ACC is activated but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise Control Ready.” NOTE:
When vehicle speed becomes too high to display the pitch and roll, “- -” will display in place of the numbers, and the graphic will be greyed out. A Push the SET + or the SET- button (located on the steering wheel) and the following will display in the instrument cluster display: