LOADING 1820 - TRANSPORTATION 31 LOADING p 1820 - TRANSPORTATION 31 LOADING LOADING Load Machine Load Machine 1. Start machine following instructions in OPERATION . 1. Start machine following instructions in OPERATION . 2. Push boom control (green) to lower boom as far as possible without hitting ramps. 2. Push boom control (green) to lower boom as far as possible without hitting ramps. 3. Engage axle lock (blue). 3. Engage axle lock (blue). 4. Push throttle (black) to 1/2 open. 4. Push throttle (black) to 1/2 open. EMERGENCY STOP: Release operator presence switch. EMERGENCY STOP: Release operator presence switch. 5. Move speed/direction control (orange) to forward or reverse position. 5.
Move speed/direction control (orange) to forward or reverse position. To turn, move speed/direction control left or right. To turn, move speed/direction control left or right. 6. Align trencher with ramps or trailer, boom first. 6. Align trencher with ramps or trailer, boom first. 7. Guide trencher onto trailer. 7. Guide trencher onto trailer. 8. When tie down position is reached, move speed/direction control (orange) to neutral position. 8. When tie down position is reached, move speed/direction control (orange) to neutral position. 9. Push boom control (green) to lower boom. 9. Push boom control (green) to lower boom. 10. Disengage pump control. 10. Disengage pump control. 11.
Pull throttle to turtle. 11. Pull throttle to turtle. 12. Turn key to off position. 12. Turn key to off position. 13. Close fuel shut-off valve on gasoline engine. 13. Close fuel shut-off valve on gasoline engine. 14. Tiedown trencher to trailer. 14. Tiedown trencher to trailer.