24.6.4 REPLACE TRANSMISSION CASE OIL FILTER ELEMENT Remove the floor plate. Remove bolts 0, and cover 0, and take element @ out case. from Clean inside of case and removed parts, and install a element. Fill case with oil and fix cover @ with bolts 0. new _ After replacement of element, loosen air vent plug @ and start engine. Overflow oil until no air bubble comes out from plug @ and tighten plug 0. Always use a genuine Komatsu element. 24.6.5 CLEAN BREATHER Remove the breather, and rinse with clean diesel oil or flushing oil to remove the dirt from the inside. 1. Transmission case breather \ / AE080820 2. Steering clutch case breather 3.
Final drive case breather (For D58E-IB only) I 0 0 AE080840 3-53