27. USING SEAT BELT 27.2.2 ADJUST THE BELT LENGTH IN THE FOLLOWING MANNER To shorten the belt Pull the free end of the belt on either the buckle body or tongue side. AE078090 To lengthen the belt Pull the belt while holding it at a right angle to buckle or tongue. Inspect bolts and fittings on the chassis for tightness. Retighten any loose bolts to 19.6 to 29.4 Nm (2 to 3 kgm, 14.5 to 21.7 Ibft) torque. If the seat is scratched or frayed or if any of the fittings are broken or deformed from long service, replace the seat belt immediately. AE078100 1 5-6