20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE 20.1 FUEL, OIL Select the fuel and oil from the table below according to the ambient temperature. The specified capacity is the total amount of oil, including the oil in the piping of the various components. The refill capacity is the amount of oil added when changing the oil during inspection and maintenance. When starting the engine in an ambient temperature of lower than O”C, always use SAEIOW, SAEIOW-30 or SAE15W-40, even if the temperature goes up to 10°C during the daytime. 20.2 COOLANT Use tap water for the coolant.
If the only available water is river water or well water, please contact your Komatsu distributor for advice. When changing the coolant, adjust the density according to the ambient temperature at the place of operation. For details, see “24.2 WHEN REQUIRED”. PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS T KIND OF FLUID CAPACITY RESERVOIR Specified Refill -4 14 32 50 68 86°F -20 -10 0 10 20 3O’C AMBIENT TEMPERATURE 26 e 6.87 US gal 5.72 UK gal Engine oil pan 30 e 7.93 US gal 6.60 UK gal Steering clutch case (incl. bevel gear case) 63 Q 16.64 US gal 13.86 UK gal 581 15.32 US gal 12.76 UK gal >58E-1, -IA: 13& 3.43 US aal 2.86 UK ial D58E-IB: 14 e 3.70 US gal 3.08 UK gal D58P-1:
14.5 f 3.83 US gal 3.19 UK gal 13e 3.43 US gal 2.86 UK gal 14 e 3.70 US gal 3.08 UK gal 14.5 e 3.83 US gal 3.19 UK aal Final drive case (each) Engine oil Transmission case (incl. torque converter case) 34 e 8.98 US gal 7.48 UK gal 34 e - 8.98 US gal 7.48 UK gal Damper case 1.3 e 0.34 US gal 0.29 UK gal 1.3 e 0.34 US gal 0.29 UK gal 65 i? 17.17 US gal 14.30 UK gal Hydraulic system 92 e 24.31 US gal 20.24 UK gal 250 e 66 US gal 55 UK gal Diesel fuel Fuel tank Cooling system 57 e 15.06 US gal 12.54 UK gal Water Idd antifreeze % ASTM D975 No. 1 3-10