Technical Data* *Modifications reserved 1) Length of cross-member A = 600 mm for 1200x1200 mm pallet, stacking depth 1200 mm, mechanical guidance. 2) Minimum overall height 2900mm 3) guided: Fork in front position : Only minimal travel movement for positioning are permissible. Fork in stacking position: from lift height h3 = 3000 mm speed is reduced to 50% of maximum speed (K13) from lift height h3 = 4500 mm maximum speed = 2,5 km/h (K13) unguided: Fork in front position : Only minimal travel movement for positioning are permissible. Fork in stacking position:
from lift height h3 500 mm = maximum speed up to lift height h3 500 mm = maximum speed 2,5 km/h 4) When inductive guidance, add 60 mm 20 K10, K13 Characteristics 1.2 Manufacturer’s model designation K10 Telescopic K13 Telescopic K13 Triplexmast 1.3 Power (electric, Diesel, petrol) electric electric electric 1.4 Controls (hand, pedestrian, stand on..) Driver seated/stand - on Driver seated/stand - on Driver seated/stand - on 1.5 Capacity/load Q(kg) 1000 1350 1350 1.6 Load centre c (mm) 400/600/600 400/600 400/600 1.9 Wheel base y (mm) 1745 1990 1990 Weight 2.1 Truck weight (incl.
battery) kg 5730 5934 6148 6255 6255 68437218 6217 6471 6762 6907 2.2 Axle load loaden drive -/load end kg 1260/5470 5352 5505 5582 5773 60036271 5554 5735 5943 6047 2.3 Axle load unloaden drive -/load end kg 2000/3730 3323 3476 3553 3744 39744242 3524 3706 3914 4018 Wheels Tyres 3.1 Tyres drive -/load end kg Vukollan/Vukollan Vukollan/Vukollan Vukollan/Vukollan 3.2 Tyre size drive -/load end mm Ø 343x135/200x105 Ø 343x135/310x152 Ø 343x135/310x152 3.5 Number of wheels (x=traction) drive -/load end 1x/4 2x/4 2x/4 3.6 rack width (front) drive end b (mm) 10 0 0 0 3.7 rack width (rear)1) load end b (mm) 11 1015 1015 1015 Dimensions 4.2 Height mast lowered h (mm) 1 2400 2900 3400 3900 4100 2800 3200 3400 3900 45005200 2450 2800 3200 3400 4.3 Freelift h (mm) 2 - - - 4.4 Lift h (mm) 3 2730 3730 4730 5730 6130 3330 4130 4530 5530 64307630 3280 4330 5530 6030 4.5 Height mast fully raised h (mm) 4 5180 6180 7180 8180 8580 5850 6650 7050 8050 8950 10100 5800 6850 8050 8550 4.7 Height over head guard (cabine) h (mm) 6 2365 2520 2520 4.8 Height platform h (mm) 7 265 410 410 4.11 Intial lift h (mm) 9 1800 1800 1800 4.14 Height platform raised h (mm) 12 2995 3995 4995 5995 6395 3740 4540 4940 5940 68408040 3690 4740 5940 6440 4.15 Lowered height h (mm) 13 45 60 60 4.19 Overall length without charge 1) l (mm) 1 3615/3490 / 3515/3390 / 3390/3265 3755/3655 3755/3655 4.21 Overall width chassis1) b 1/b 2(mm) 1160/1400 1160/1452 1160/1452 4.22 Dimensions of the fork1) s/e/l 40x100x800 od.1200 50x100x800 od.1200 50x100x800 od.1200 4.23 Fork carriage DIN 15173, Form A,B DIN 15173, 2B DIN 15173, 2B DIN 15173, 2B 4.24 Fork carriage width b (mm) 3 640 640 640 4.25 Overall width of fork1) b (mm) 5 620/540/540 620/540 620/540 4.27 Width over guide rollers 1) b (mm) 6 1295/1585/1585 1295/1585 1295/1585 4.29 Shift lateral1) b (mm) 7 890/1290/1290 890/1290 890/1290 4.31 Floor clearance under charge, loaden m (mm) 1 40 40 40 4.32 Floor clearance centre of wheel base m (mm) 2 78 90 90 4.34 Working aisle width.
palette 800x1200 cross/ length1) Ast (mm) 1300/1700/1700 1300/1700 1300/1700 4.35 Turning radius 1)5) Wa (mm) 2170 2360 2360 4.38 Distance, swivel fork rotation point1) l (mm) 8 1215/1090 / 1115/990 / 990/865 1110/1010 1110/1010 4.39 Length traverse arm A (mm) 700/600/475 700/600 700/600 4.40 Width1) B (mm) 1090/1490/1490 1090/1490 1090/1490 4.41 Width traverse arm1) F (mm) 305 305 305 4.42 Transfer aisel with load, pallet cross/lengthw 1) Au (mm) 4130/4000 / 3960/3850 / 3850/3740 4420/4220 4420/4220 Performance 5.1 Travel speed with/without load 3) km/h 9,0/9,0 9,0/9,0 9,0/9,0 5.2 Hoist speed with/without load 2) m/s 0,27/0,28 0,28/0,36 0,25/0,30 5.3 Lowering speed with/without load m/s 0,35 0,36 0,36 5.4 Side shift speed with/without load m/s 0,15 0,17 0,17 5.10 Service brake generator./electricmechanical generator./electricmechanical generator./electromechan.
E-Motors 6.1 Travel motor, rating at S2=60min kW 5,2 5,2 5,2 6.2 Lifting motor, rating at S3=15% kW 9,0 15,0 15,0 6.3 Battery to DIN 43531/35/36A,B,C DIN 43531,B DIN 43531,B DIN 43531,B 6.4 Battery voltage/capacity V/Ah 48/600 48/720 48/720 6.5 Battery weight +/-5% kg 1120 1309 1309 other 8.1 Type of drive control SCR SCR SCR 8.4 Sound level, driver’s ear dB(A)