Check Chassis Range! 0000 - Overall system/tractor A - General In this technical documentation, the different tractor types are basically divided according to components that, with a few technical exceptions, reflect the structure of replacement parts. For example, these components may be "0000 – overall system"; "1005 – transmission control system"; "2000 – engine" etc. The content of this documentation consists of several individual documents in their own right. These documents can be used for a variety of technical documentation and are not type-specific. I003732 Fig. 1. 11 T003504 Version 1 21-04-2009 These are: A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . General B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Faults C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Documents and diagrams D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Component position E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Measuring and testing F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting and calibrating G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . Repair H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service information Each component is divided into separate registers, identified by a register letter. Header: The header shows the group title, the document title and the register letter. Footer: Each document is specifically identified and has a version status and a release date that are shown at the bottom right (A) of the footer. The applicability of each document according to chassis number range is shown at the bottom (B) of the footer. N OTE :
If the document does not apply to all chassis num- bers, this is indicated by the additional information 2 Documentation layout "Refer to chassis number range" Header and footer layout: see §1 (C).