. OPERATION EXPLANATION OF COMPONENTS 3 - 11 FILTER, OIL REPLACEMENT TIME DISPLAY After the system ch eck is completed, thi s display (4) displays t he filter and type of oil f or 30 second s for item s where t he replacement interval is close. W hen this happens, the maintenance caution r lights up. as been replaced, reset the replacement time. "RESET METHOD FOR FILTER, OIL IME (PAGE 3-30)". lamp also flashes o If any filter or oil h For details, see REPLACEMENT T "RESET IME (PAGE 3 METHO -30)". REMARK The top line of th e character d isplay s hows the name a nd ID number of th e item needing replacement. The line at the bottom s replaced.
hows the remaining time until replacement and the total number of times the item has been replacement es been After giving the d isplay for 30 seconds , the displ ay doe s not appear again until the startin g switch is turned a gain to the ON positi on. If the action cod e is being displayed, t he messag e in the diagram above is not displayed o n the character display. If there 2 or mor e items to be display ed, they a re displayed every 3 seco nds. ed once each. d oil replacement interval. If there are mor e than 10 item s to be displayed , all the item s are display The display is g iven when the time re aches 30 hours before the filter an d oil replaceme nt interval.
When the repla cement interv al nd he replacement interval has pas sed, the lamp lights u Items for display of filter, oil replacemen Item Replacement interval (H) Character display ID number Engine oil 500 ENGOIL 01 Engine oil filter 500 ENGFILT 02 Fuel prefilter 500 P FUEL FILT 41 Fuel main filter 1000 FUEL FILT 03 Hydraulic filter 1000 HYD FILT 04 Transmission oil 1000 TM OIL 12 Transmission oil fil ter 1000 TM FILT 13 Final drive case 1000 AXLE OIL 15 Hydraulic oil 2000 HYD OIL 10 Circle case oil 2000 CR CASE OIL 36 Tandem case oil 2000 TD CASE OIL 37