3.3. Operation Operation Adjusting the rear-view mirrors Sit down on the driver’s seat and adjust the rear-view mirrors to their required positions. You should be able to view the traffic coming from behind without having to change your seating posi- tion. Putting on the safety belt Danger of injury! A damaged safety belt, a safety belt that has been stretched in an accident, or a safety belt the belt fixings or fastening screws of which have not been mounted correctly will not protect you sufficiently in case of accident! Replace the safety belt, if it is damaged, or if the machine has been involved in an accident.
Check that the belt fixings and fastening screws are in perfect condition, before you put on the safety belt. If you have not put on the safety belt and are involved in an accident, this may lead to severe injuries! Put on the safety belt, before you start work and do not take it off during work. Put on the safety belt in such a way that it is not twisted and fits tightly. The machine is provided with a lap belt which automatically retracts. When pulled slowly, automatic belts ensure full freedom of action, but block immediately, if you suddenly brake or accelerate, or if you drive downhill or take corners. Putting on the safety belt 1. Sit down on the driver's seat. 2.
Slowly and continuously pull out the belt. 3. Insert the lock tongue into the lock socket until the lock engages. 4. Then, pull the belt to check whether or not the lock tongue is fully engaged. NOTE The belt cannot be pulled out unless it is completely wound up. Taking off the safety belt Press the orange button to release the lock of the safety belt and allow the belt to wind up. 3-44 WA100M-5 – VEAM280201 WARNING WARNING