INSTRUMENTS AND CONTROLS 10 - SPEED INCREASE CONTROL The button (1) that allows the machine travel speed to be in- creased is positioned on the left joystick grip. When the button is pressed, the speed increases; release the button to return to normal speed. q The speed increase function should be used only for the fast speed transfers of the machine; in any other case, it is advisable to use the normal speed. q Do not use the speed increase control when performing steering or counterrotation manoeuvres. 11 - FLOATING DEVICE CONTROL (IF INSTALLED) The right joystick grip is provided with a switch (1) that when pressed (WARNING LIGHT ON) (see "3.3.2 pos.
8 - FLOA- TING DEVICE WARNING LIGHT"), frees the loader arm (float- ing position), that is, allows it to automatically follow the undulations of the ground. Press the switch again to restore the standard operating con- ditions (WARNING LIGHT OFF) ("3.3.2 pos. 8 - FLOATING DEVICE WARNING LIGHT"). RWA35990 92 CAUTION