SERIES 60 ON-HIGHWAY ENGINE OPERATOR'S GUIDE SPECIFICATIONS This section lists the fuel and lubrication oil filters needed for the Series 60 engine. Also listed as the various POWER COOL engine products. Fuel and Lubricating Oil Filters The fuel filters and their part numbers are listed in Table 26. The lubricating oil filters and their part numbers are listed in Table 27. * Elemax extended service element (optional). Optional. May be used in place of, but not together with, the primary filter. Used on engines equipped with DDEC V.
Table 26 Fuel Filters Series 60 Regular Service Table 27 Lubricating Oil Filters OIL PAN CAPACITY 32 quarts to the FULL mark without oil filters All Series 60 truck oil pans (front sump and rear sump) require the same amount of engine oil Total Oil Capacity Of The Engine 40 quarts to the FULL mark with oil filters installed and filters and oil galleries charged. Oil Pan Capacity 26 quarts to the LOW mark without oil filters All information subject to change without notice.
137 DDC-SVC-MAN-0039 Copyright © 2009 DETROIT DIESEL CORPORATION Filter Type Detroit Diesel Part Number Primary — Spin-On 23530706 Primary Fuel/Water Separator — Spin-On† 23512317† Secondary — Spin-On 23530707 or 23533726‡ Primary — Fuel Pro 380/382 Element 23521528 or 23529168* Filter Type Detroit Diesel Part Number Full Flow 23530573 Full Flow (High Capacity) DELF3998