145 GROUND SPEED DIRECTION FOOT CONTROL 1. 309-943 1 PEDAL REF NO. PART NUMBER QTY DESCRIPTION REMARKS 2. 106-387 3 FLG LOCKNUT (M10-1.5) 3. 310-411 1 CLAMP 4. 179-293 4 BRONZE BUSHING 5. 183-221 1 PIN 6. 110-774 2 BALL JOINT (1/4-NF) 7. 309-707 1 CABLE BRACKET 8. 308-441 1 CONTROL ARM 9. 309-939 1 CABLE BRACKET 10. 110-318 1 BALL JOINT (#10-32,FM) 12. 106-654 2 FLG LK SCREW (M10-1.50 X 16mm) 13. 106-685 2 LOCKNUT (M12-1.75, PRV TRQ,10.9) 14. 105-188 1 LOCKNUT (7/16-NF) 15. 110-333 1 BOLT-ON CLAMP (1") 11. 107-770 3 LOCKNUT (1/4-NF, NYL INSERT) 16. 106-628 1 SCREW (M10-1.50 X 60mm) 17. 370-036 1 SPACER 18. 106-620 1 SCREW (M12-1.75 X 150mm) 19. 178-582 1 SPACER 20.
115-650 1 TORSION SPRING 21. 115-482 1 GRIP RING (.500") 22. 196-359 1 CONTROL CABLE 23. 107-135 4 CLIP NUT (M8-1.25) 24. 106-992 6 FLG LK SCREW (M8-1.25 X 25mm) 25. 331-595 1 PEDAL MOUNT 26. 107-604 1 ROD END (7/16-NF) 28. 106-175 2 NUT (M10-1.50) 27. 319-365 1 PROTECTIVE BAR SEE FOOTNOTE 1 29. 309-705 1 LEVER 319-914 1 LEVER 30. 105-920 1 JAM NUT (7/16-NF) 31. 181-566 1 SLEEVE (1.5") 32. 365-240 - CONTROL LEVER 33. 196-287 - CONTROL CABLE 506-021 - NUT (#10-32) 35. 105-472 1 BOLT (1/2-NC X 5") 36. 105-065 1 LOCKNUT (1/2-NC) 34. 106-386 2 FLG LOCKNUT (M8-1.25) 37. 107-002 2 FLG LK SCREW (M10-1.50 X 30mm) 38. 106-142 1 SCREW (M10-1.50 X 65mm) 39. 106-387 1 FLG LOCKNUT (M10-1.5) FOOTNOTES: 1.
IF ORDERING THIS PART FOR A MACHINE WITH SERIAL NUMBER__________________ OR OLDER, YOU MUST ALS0 ORDER NUMBER 319-914 RIGHT CONTROL LEVER, AND REFER TO PARTS PAGE "GRD SPEED DIRECTION HAND CONTROL". NOTE: SEE INSTALLATION INSTRUCTIONS 02 ID0151542