ENGINE 7. Reinstall the dipstick and twist to lock it in place. Topping Up the Engine Oil Pipe and Hose Clamps 1. Top up with oil, if necessary, via the filler opening. Use the correct grade in the correct quantity. For oil replacement, please see engine Operator’s Manual included with this chassis. Use the following table for torque specifications to check pipe and hose clamps. 2. After topping up, wait 1 minute and check the oil level again. 3. Reinstall the oil fill cap and twist to lock it in place. 1. Engine Oil High Level 2. Engine Oil Low Level 5 (03/17) Y53-6077-1B1 5-103