. OPERATION EXPLANATION OF COMPONENTS CONTROL LEVERS, PEDALS (1) (2) (3) (4) Directional lever work equipment lock lever Work equipment lever Auxiliary control lever (5) (6) (7) Brake pedal Accelerator pedal Parking brake lever DIRECTIONAL LEVER This lever (1) is used to switch the direction of travel of the machine between forward and reverse. When starting the engine, if the directional lever is not at the N position, the engine will not start. Position (a): FORWARD Position N: NEUTRAL Position (b):
REVERSE REMARK When the starting switch is turned to the ON position, if the directional lever is not at the N position, the central warning lamp lights up and the alarm buzzer sounds intermittently. When the directional lever is set to the N position, the central warning lamp goes out and the alarm buzzer stops. 3 - 39