1. DIAGNOSIS TOOLS “ALL ROUND TESTER” 1.1 ALL ROUND TESTER 1.1.6 SETTING THE SERIAL PORTS The tractor electronic systems to which the ART can be connected are different one from another and utilize different pinouts at the diagnosis socket for interfacing purposes. For this reason, the serial ports must first be configured so as to guarantee full compatibility of the ART with all SAME elec- tronic systems. To change the serial port settings, proceed as follows. 1 - Switch off the engine and remove the starter key 2 - Connect the ART to a diagnosis socket 3 - Press and hold A on the keypad, while inserting and positioning the starter key at “ I ” (ON) 4 - Enter the password 1 2 3 F .
5 - Press 2 . 20-5 P A S S W O R D : C O N F I G U R A T I O N M E N U 1 - L A N G U A G E S E L . 2 - S E R I A L P O R T S S E L E C T E T O E S C A P E