LUBRICATION AND SERVICE Preventive Maintenance will contribute to the long life and dependability of the HAULPAK ® truck and its components. The use of proper lubricants and the performance of checks and adjustments at recom- mended intervals is most important. The service inter- vals presented here are in hours of operation and are recommended intervals in lieu of an oil analysis program which may determine different intervals. However, if truck is being operated under extreme conditions, some or all of the intervals may need to be shortened and the service performed more frequently.
Refer to manufacturer’s service manual when servicing the engine or any components of the Allison transmis- sion system. Lubrication requirements are referenced to the lube key found in the Truck Lubrication Specifications Chart. For detailed service requirements for specific components, refer to the service manual section for that component (i.e. Section "G" for Final Drive, Section "H" for Suspensions, etc.). TEMPERATURE CHART FOR C-4 FLUIDS Use only antifreeze that is compatible with engine as specified by engine manufacturer.
HB7014 3/96 Lubrication and Service HB7-1 140M SERVICE CAPACITIES Gallons Liters Cooling System 38 144.0 Crankcase -- Cummins (includes lube oil filters) 9.0 34.0 Hydraulic System (includes tank) 144 5451 Hydraulic Tank 95 3601 Fuel Tank 130 492.0 Final Drive 43 162.8 Front Spindle 1 3.8 Transmission (Sump, Filters, Lines, etc.) 22 83.4 210M SERVICE CAPACITIES Gallons Liters Cooling System 48 181.7 Crankcase -- Cummins (includes lube oil filters) 14.2 53.8 Hydraulic System (includes tank) 144 5451 Hydraulic Tank 95 3601 Fuel Tank 154 583.7 Final Drive 56 212.2 Front Spindle 1 3.8 Transmission (Sump, Filters, Lines, etc.) 22 83.4 COOLING SYSTEM ANTI--FREEZE RECOMMENDATIONS Ethylene Glycol Permanent Type Anti-Freeze Percentage of Anti-Freeze Protection to:
°F °C 10 + 23 -5 20 + 16 -9 25 + 11 -11 30 + 4 -16 35 -3 -19 40 -12 -24 45 -23 -30 50 -34 -36 55 -48 -44 60 -62 -52