GETTING TO KNOW YOUR VEHICLE 25 Manual Outside Mirrors — If Equipped From the inside of the vehicle, use the control lever to adjust the mirror. 2 Power Mirror Controls Multifunction Lever 1 — Neutral Position 2 — Driver Mirror Select Position 3 — Passenger Mirror Select Position 4 — Four-Way Mirror Control Switch H EADLIGHTS Manual Mirror Control Lever To turn on the headlights, turn the end of the multifunction lever to the headlight position. When the headlight switch is on, the parking lights, taillights, license plate light, clearance lights and instrument panel lights are also turned on. To turn off the headlights, turn the end of the multifunction lever back to the O (Off) position.
Power Outside Mirrors — If Equipped The power mirror controls are located on the mirror flag trim above the driver’s door trim panel. To adjust a mirror, turn the control knob toward the left or right mirror positions indicated. Tilt the control knob in the direction you want the mirror to move. When you are finished adjusting the mirror, turn the control to the center (neutral) position to prevent accidental mirror movements. EXTERIOR LIGHTS M ULTIFUNCTION L EVER The multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection and the passing lights. The multifunction lever is located on the left side of the steering column. NOTE:
Operation of the power mirrors is only available with the ignition in the MAR (ACC/ON/RUN) position.