SAFETY - Cab Tilting 1 6. Pump until the locking bar can be positioned on the anchor mounted below the right-hand cab support. Lowering the Cab 1. Place the control valve handle in the "Raise" position and pump until the locking bar can be removed from the anchor and fastened in its stored position. 7. Place the control valve handle in the “Lower” position and allow the cab to settle down slightly on the locking bar. CAUTION DO NOT try to pump the cab down or hold it down with hydraulic force. If you do, cab damage will occur. 2. Place the control valve handle in the "Lower" position. The cab The raised cab with lockbar in place should appear like this when complete. 16 Y53-6096-1C1 (09/20)