OPERATION 3. Using the (>) selector switch button scroll thought the menu to the [ MAINTENANCE ] display. 4. Once the [ MAINTENANCE ] display is reached, press the ( ‘ ) selector switch button to enter the system. 5. Once in the system using the ( )selector switch buttons you can scroll through the eight service items listed on page 2-24. 6. When you have found the item that was serviced, using the ( ‘ ) selector button switch reset the service time interval, a [ 00: RESET ] will appear on the monitor display. 3 seconds later a [ YES NO ENTER ] will appear. 7. To reset the service interval, select YES or NO using the ( ) selector switch buttons.
Once you have chosen yes or no, use the ( ‘ ) selector button to reset the maintenance time interval If yes is selected the service time interval is reset and a beep is heard. If no is selected the service time is not reset. SELECTING LANGUAGE To switch the language on the mode display. The following explanation outlines the procedure for changing the language to either English, Japanese, German, French, Italian, Spanish or Swedish. To Select A Language 1. To enter reset language mode the ignition key must be in the “ON” position. 2. Press the ( ‘ )selector switch button and it will display the odometer. 3.
Using the (>)selector switch button scroll through the menu to the [ LANGUAGE ] display. 4. Once the [ LANGUAGE ] display is reached, press the ( ‘ ) selector switch button to enter the system. The current language is displayed. 5. Once in the system using the( )selector switch buttons you can scroll through the seven languages. 6. After selecting a language, press the ( ‘ ) selector switch button. This confirms the language. To abort, press the ( „ ) selector switch button. When completing the operation, press the ( „ ) selector switch button twice or turn the ignition switch “OFF”. 2-14 WA480-5L